CRS328-4C-20S-4S+RM
Smart Switch, 20 x SFP cages, 4 x SFP+ cages, 4 x Combo ports (Gigabit Ethernet or SFP), 800MHz CPU, 512MB RAM, 1U rackmount case, Dual Power Supplies, RouterOS L5 or SwitchOS (Dual Boot)
The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.
The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands.
The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
Specification
- Product code CRS328-4C-20S-4S+RM
- Suggested price $449.00
- Architecture ARM 32bit
- CPU 98DX3236
- CPU core count 2
- CPU nominal frequency 800 MHz
- Switch chip model 98DX3236
- Dimensions 443 x 194 x 44 mm
- RouterOS license 5
- Operating System RouterOS / SwitchOS
- Size of RAM 512 MB
- Storage size 16 MB
- Storage type FLASH
- MTBF Approximately 200'000 hours at 25C
- Tested ambient temperature -20°C to 60°C
- Number of AC inputs 2
- AC input range 100-240
- Number of PSU slots 2
- Frequency (Hz) 50-60
- Max power consumption 43 W
- Cooling type 2 fans
- Ethernet Combo ports 4
- SFP ports 20
- SFP+ ports 4
- Serial console port RJ45
- CPU temperature monitor Yes
- Voltage Monitor Yes
- Mode button Yes
- Certification CE, EAC, ROHS
| CRS328-4C-20S-4S+RM | |||||||
|---|---|---|---|---|---|---|---|
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Switching | Non blocking Layer 2 throughput | 5,201.6 | 63,167.8 | 15,037.6 | 61,594.0 | 95,238.1 | 48,761.9 |
| Switching | Non blocking Layer 2 capacity | 5,201.6 | 126,335.5 | 15,037.6 | 123,188.0 | 95,238.1 | 97,523.8 |
| Switching | Non blocking Layer 1 throughput | 5,201.6 | 64,000.0 | 15,037.6 | 64,000.0 | 95,238.1 | 64,000.0 |
| Switching | Non blocking Layer 1 capacity | 5,201.6 | 128,000.0 | 15,037.6 | 128,000.0 | 95,238.1 | 128,000.0 |
| CRS328-4C-20S-4S+RM | 98DX3236 all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 104,3 | 1266.6 | 273,5 | 1120.3 | 449 | 229.9 |
| Bridging | 25 bridge filter rules | 104 | 1263.0 | 104,6 | 428.4 | 104,5 | 53.5 |
| Routing | none (fast path) | 104,3 | 1266.6 | 273,9 | 1121.9 | 343,5 | 175.9 |
| Routing | 25 simple queues | 104,3 | 1266.6 | 136,9 | 560.7 | 137,4 | 70.3 |
| Routing | 25 ip filter rules | 64,8 | 786.9 | 65,9 | 269.9 | 65,8 | 33.7 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Documents
