Products
Products
     

    SXT 6

    SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.

    IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order. This product is NOT for unlicensed ISM bands!

    Product specifications

    Details
    Product code RBSXTG-6HPnD
    10/100/1000 Ethernet ports 1
    802.11a Yes
    802.11n Yes
    Antenna gain 16
    CPU AR9344
    CPU core count 1
    CPU nominal frequency 600 MHz
    Dimensions 140x140x56mm
    License level 4
    Max Power consumption 14W
    Number of USB ports 1
    Number of chains 2
    Operating System RouterOS
    PCB temperature monitor Yes
    PoE in Yes
    Size of RAM 64 MB
    Storage size 16 MB
    Storage type FLASH
    Supported input voltage 7 V - 30 V
    USB Power Reset Yes
    USB slot type USB type A
    Voltage Monitor Yes
    Wireless chip model AR9344
    Wireless standards 802.11a/n
    Suggested price $99

    Wireless specifications

    6 GHz
    Transmit power (dBm)Receive SensitivityTransmit power (mW)
    6MBit/s30-931000
    54MBit/s27-80501
    MCS029-93794
    MCS724-76251

    More info

    Ethernet test results

    RBSXTG-6HPnDAR9344 1G 1 port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)81.0983.7232.0950.3269.6138.0
    Bridging25 bridge filter rules81.0983.786.0352.387.644.9
    Routingnone (fast path)81.0983.7210.0860.2226.9116.2
    Routing25 simple queues81.0983.7103.9425.6106.654.6
    Routing25 ip filter rules56.8689.859.6244.160.531.0
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results