Products
Products
     
    SXTsq Lite60 For use as 60GHz CPE in Point -to-Multipoint setups for connections up to 200m with wAP 60G AP, low cost version

    The SXTsq Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum. Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP.

    For links up to 200 meters, this is the best alternative for wireless connections where 2 and 5 GHz wireless space is crowded and unreliable, at a fraction of the cost. Also, it's possible to make point-to-point link with two SXTsq Lite60.

     Send purchase questions

    Specifications

    Details
    Product code RBSXTsq-60ad
    Architecture MIPSBE
    CPU QCA9531
    CPU core count 1
    Dimensions 129 x 129 x 34 mm
    License level 3
    Operating System RouterOS
    Size of RAM 64 MB
    Storage size 16 MB
    Storage type FLASH
    Tested ambient temperature -40°C .. +50°C
    Suggested price $69.00

    Powering

    Details
    PoE in Passive PoE
    PoE in input Voltage 12-30 V
    Number of DC inputs 1 (PoE-IN)

    Ethernet

    Details
    10/100 Ethernet ports 1

    Included parts

    BrochureOpen
    Quick GuideOpen
    RouterOS current releaseDownload
    Selection guide for PtP linksOpen
    Selection guide for PtMP linksOpen
    RouterOS software manualOpen

    High resolution images

    Ethernet test results

    RBSXTsq-60adQCA9531 100M one port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)8.198.423.596.3173.688.9
    Bridging25 bridge filter rules8.198.423.596.370.936.3
    Routingnone (fast path)8.198.423.596.3160.882.3
    Routing25 simple queues8.198.423.596.390.846.5
    Routing25 ip filter rules8.198.423.596.343.222.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

    Related products