Home Hardware Wireless for home and office

mAP

Dual-Chain 2.4GHz micro AP, 650MHz CPU, 64MB RAM, 2xEthernet, PoE out

PoE

Specification Find retailer

mAP

The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Specification

Specifications

Product code RBmAP2nD
Suggested price $45.00
Architecture MIPSBE
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
Switch chip model QCA9531-BL3A-R
Dimensions 68x68x19mm
RouterOS license 4
Operating System RouterOS
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
MTBF Approximately 100'000 hours at 25C
Tested ambient temperature -20°C to 70°C

Wireless capabilities

Wireless 2.4 GHz Max data rate 300 Mbit/s
Wireless 2.4 GHz Number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 1.2
Wireless 2.4 GHz chip model QCA9531
Wireless 2.4 GHz generation Wi-Fi 4

Ethernet

10/100 Ethernet ports 2

Peripherals

Number of USB ports 1
USB Power Reset Yes
USB slot type microUSB type AB
Max USB current (A) 1

Powering

MicroUSB input Voltage 5 V
Number of DC inputs 3 (DC jack, PoE-IN, MicroUSB)
DC jack input Voltage 8-57 V
Max power consumption 5 W
PoE in 802.3af/at
Cooling type Passive
PoE in input Voltage 12-57 V

PoE-out

PoE-out ports Ether2
PoE out Passive PoE
Low voltage PoE-Out current limit 0.5 A
Max total out (A) 0.5 A

Certification & Approvals

Certification FCC, IC

Other

PCB temperature monitor Yes
Voltage Monitor Yes

Included parts

Note

The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase.

2.4 GHz

Transmit (dBm)

Receive Sensitivity

1MBit/s

-96

11MBit/s

-89

6MBit/s

-93

54MBit/s

-74

MCS0

-93

MCS7

-71

RBmAP2nD		QCA9531 100M two port test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	16.3	197.9	47.0	192.5	297.6	152.4
Bridging	25 bridge filter rules	16.3	197.9	47.0	192.5	80.4	41.2
Routing	none (fast path)	16.3	197.9	47.0	192.5	233.1	119.3
Routing	25 simple queues	16.3	197.9	47.0	192.5	131.4	67.3
Routing	25 ip filter rules	16.3	197.9	47.0	192.5	49.1	25.1

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results