Products
Products
     

    SXT G-5HnD

    SXTG-5HnD is a low cost, high speed 5GHz outdoor sector AP, with a Gigabit port, to fully utilize the capacity of 802.11n. At 25° degree beamwidth, you can conveniently create sector setups with a few client devices because this device comes with an AP license (Level4).

    Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make AP, point to point link or CPE.

    Package contains SXTG-5HnD, mounting loops, PoE injector, power adapter

    SXT install guide:

    General

    Details
    Product code RBSXTG-5HnD
    Architecture MIPS-BE
    CPU AR7242
    CPU core count 1
    CPU nominal frequency 400 MHz
    Dimensions 140x140x56mm, 265g
    License level 3
    Operating System RouterOS
    Size of RAM 32 MB
    Storage size 64 MB
    Storage type NAND
    Tested ambient temperature -30C to +70C
    Suggested price $99.00

    Powering

    Details
    Max Power consumption 7W
    PoE in Passive PoE

    Wireless

    Details
    Wireless 5 GHz number of chains 2
    Wireless 5 GHz standards 802.11a/n
    Antenna gain dBi for 5 GHz 16
    Wireless 5 GHz chip model AR9280

    Ethernet

    Details
    10/100/1000 Ethernet ports 1

    Peripherals

    Details
    Number of USB ports 1
    USB Power Reset Yes
    USB slot type USB type A

    Other

    Details
    PCB temperature monitor Yes
    Voltage Monitor Yes

    More info

    Ethernet test results

    RBSXTG-5HnDAR7242 1G all port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)81.2986.1178.4730.9194.099.3
    Bridging25 bridge filter rules51.5625.552.3214.353.727.5
    Routingnone (fast path)81.2986.1167.0684.0183.794.1
    Routing25 simple queues81.2986.188.5362.492.847.5
    Routing25 ip filter rules37.6457.038.4157.137.519.2
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results