CRS112-8P-4S-IN
8x Gigabit Ethernet Smart Switch with PoE-out, 4x SFP cages, 400MHz CPU, 128MB RAM, desktop case, RouterOS L5
CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.
CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately - product codes 48POW (1.46A 70W) and 48V2A96W (2A 96W)). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V. PoE-Out is passed over mode B 4,5 (+) and 7,8 (-) pins
Specification
- Product code CRS112-8P-4S-IN
- Suggested price $209.00
- Architecture MIPSBE
- CPU QCA8511
- CPU core count 1
- CPU nominal frequency 400 MHz
- Switch chip model QCA8511
- Dimensions 200 x 142 x 44 mm
- RouterOS license 5
- Operating System RouterOS
- Size of RAM 128 MB
- Storage size 16 MB
- Storage type FLASH
- MTBF Approximately 200'000 hours at 25C
- Tested ambient temperature -20°C to 60°C
- Number of DC inputs 2 (DC jack)
- DC jack input Voltage 18-28 V / 48-57 V
- Max power consumption 160 W
- Max power consumption without attachments 10 W
- Cooling type Passive
- PoE-out ports Ether1-Ether8
- PoE out 802.3af/at
- Low voltage PoE-Out current limit 1 A
- High voltage PoE-Out current limit 450 mA
- Max total out (A) 2.8A (18V-28V) & 1.4A (48V-57V) A
- 10/100/1000 Ethernet ports 8
- Number of 1G Ethernet ports with PoE-out 8
- SFP ports 4
- Serial console port RJ45
- PCB temperature monitor Yes
- Certification CE, EAC, ROHS
- IP IP20
| CRS112-8P-4S-IN | |||||||
|---|---|---|---|---|---|---|---|
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Switching | Non blocking Layer 2 throughput | 975.3 | 11,844.0 | 2,819.5 | 11,548.9 | 17,857.1 | 9,142.9 |
| Switching | Non blocking Layer 2 capacity | 975.3 | 23,687.9 | 2,819.5 | 23,097.7 | 17,857.1 | 18,285.7 |
| Switching | Non blocking Layer 1 throughput | 975.3 | 12,000.0 | 2,819.5 | 12,000.0 | 17,857.1 | 12,000.0 |
| Switching | Non blocking Layer 1 capacity | 975.3 | 24,000.0 | 2,819.5 | 24,000.0 | 17,857.1 | 24,000.0 |
| CRS112-8P-4S-IN | QCA8511 1G all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none | 48.0 | 582.9 | 73.5 | 301.1 | 78.0 | 39.9 |
| Bridging | 25 bridge filter rules | 26.1 | 317.0 | 28.6 | 117.1 | 29.6 | 15.2 |
| Routing | none | 46.5 | 564.7 | 65.7 | 269.1 | 71.1 | 36.4 |
| Routing | 25 simple queues | 14.5 | 176.1 | 16.1 | 65.9 | 16.8 | 8.6 |
| Routing | 25 ip filter rules | 7.8 | 94.7 | 8.0 | 32.8 | 8.3 | 4.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Documents
