Products
Products
     

    wAP

    The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

    The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).

    The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

    It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.

    Product specifications

    Details
    Product code RBwAP2nD
    Wireless standards 802.11b/g/n
    Number of chains 2
    Storage type FLASH
    Storage size 16 MB
    Size of RAM 64 MB
    Operating System RouterOS
    Tested ambient temperature -40C to +70C
    Antenna gain 2
    CPU nominal frequency 650 MHz
    802.11b Yes
    802.11g Yes
    802.11n Yes
    Power Jack 1
    10/100 Ethernet ports 1
    PoE in 802.3at
    License level 4
    CPU core count 1
    Wireless chip model QCA9533
    Supported input voltage 11 V - 57 V
    CPU QCA9533
    Max Power consumption 4W
    Suggested price $45

    More info

    Ethernet test results

    RBwAP2nDQCA9533 100M one port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)8.198.423.596.3173.688.9
    Bridging25 bridge filter rules8.198.423.596.370.936.3
    Routingnone (fast path)8.198.423.596.3160.882.3
    Routing25 simple queues8.198.423.596.390.846.5
    Routing25 ip filter rules8.198.423.596.343.222.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results