OmniTIK 5 PoE
7.5dBi Integrated AP, 5GHz Dual chain, 5xEthernet ports with PoE output
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has ve 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.
The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters to worry about.
Box contains OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter
- RBOmniTikUPA-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RBOmniTikUPA-5HnD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Specification
- Product code RBOmniTikUPA-5HnD
- Suggested price $99.00
- Architecture MIPSBE
- CPU AR9344
- CPU core count 1
- CPU nominal frequency 600 MHz
- Switch chip model AR9344
- Dimensions 368x125x55mm
- RouterOS license 5
- Operating System RouterOS
- Size of RAM 128 MB
- Storage size 16 MB
- Storage type FLASH
- MTBF Approximately 100'000 hours at 25C
- Tested ambient temperature -40°C to 70°C
- Number of DC inputs 1 (PoE-IN)
- Max power consumption 59 W
- Max power consumption without attachments 11 W
- PoE in Passive PoE
- Cooling type Passive
- PoE in input Voltage 11-30 V
- PoE-out ports Ether2-Ether5
- PoE out Passive PoE
- Low voltage PoE-Out current limit 1 A
- Max total out (A) 2 A
- Wireless 5 GHz Max data rate 300 Mbit/s
- Wireless 5 GHz Number of chains 2
- Wireless 5 GHz standards 802.11a/n
- Antenna gain dBi for 5 GHz 7.5
- Wireless 5 GHz chip model AR9344
- Wireless 5 GHz generation Wi-Fi 4
- 10/100 Ethernet ports 5
- Number of USB ports 1
- USB Power Reset Yes
- USB slot type USB type A
- Max USB current (A) 1
- PCB temperature monitor Yes
- Voltage Monitor Yes
- Beeper Yes
- Certification CE, FCC, IC, EAC, ROHS
- IP IP54
| RBOmniTikUPA-5HnDr2 | AR9344 100M all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 40.0 | 485.8 | 116.5 | 477.2 | 269.6 | 138.0 |
| Bridging | 25 bridge filter rules | 40.0 | 485.8 | 86.0 | 352.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 40.0 | 485.8 | 116.5 | 477.2 | 226.9 | 116.2 |
| Routing | 25 simple queues | 40.0 | 485.8 | 103.9 | 425.6 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 40.0 | 485.8 | 59.6 | 244.1 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Documents
