MikroTik RouterOS™ V2.6 Specifications Sheet

Hardware

CPU and motherboard - advanced 4th generation (core frequency 100MHz or more), 5th generation (Intel Pentium, Cyrix 6X86, AMD K5 or comparable) or newer Intel IA-32 (i386) compatible (dual processors are not supported);
RAM - minimum 32 MB, maximum 1 GB; 48 MB or more recommended
hard disk/Flash IDE - minimum 32 MB; 48MB or more recommended
for installation - floppy drive, keyboard, monitor

Basic Network Platform

TCP/IP protocol suite

• Firewall and NAT
  packet filtering, source and destination NAT, source MAC, addresses, ports, protocols, protocol options, interfaces.
• Routing
  RIP 1 / 2, OSPF v2, BGP v4,
  Equal cost multi-path routing, Policy based routing, firewall marked packet routing
• Bridging
  spanning tree protocol, multiple bridge interfaces, bridge firewalling
• Bandwidth Management
  per IP / protocol / subnet / port, CBQ, RED, SFQ, byte limited queue, packet limited queue
• Point-to-Point links
  ISDN dial-out, ISDN dial-in, RADIUS authentication/accounting, onboard serial ports, PPTP encrypted tunnel (VPN), PPTP Access Concentrator, PPPoE client, PPPoE Access Concentrator (server), modem pool
• Tunnels
  IPIP tunnels, EoIP (Ethernet over IP)
• IPsec
  IP encryption (IPsec)
• VLAN
  Virtual LAN support
• DHCP
  DHCP server per interface, DHCP client
• HotSpot
  HotSpot Gateway
• NTP
  Network Time Protocol server and client
• Monitoring/Accounting
  IP traffic accounting, firewall actions logging
• Tools
  ping, traceroute, bandwidth test, ping flood, telnet
• DNS client
  name resolving for local use, Dynamic DNS Client
• SNMP
  read only access

Special Protocols

• MikroTik Packet Packer Protocol (M3P)
  For Wireless links and for Ethernet
• MikroTik Neighbor Discovery Protocol (MNDP)

Caching Features

• DNS cache
• SQUID caching proxy

Administration

General

History undo / redo / display, multiple administrator connections
Real time updates in WinBox GUI, real time configuration

• Web/GUI
  Uses GUI tool for remote administration,
  graphing of traffic, statistics, and resource monitoring
  multiple internal configuration windows
• Terminal Console
  standard keyboard and monitor connection, scripting
  import/export of configuration scripts to screen / file
  command history, hierarchical command structure
  monitoring of interface status and traffic, context specific hints
  
• Telnet
  all terminal console features, SSH option, cut/paste of configuration
  
• Serial terminal console
  all terminal console features
• System
  date/time setting, identity setting, upgrade, ftp upload, users, access levels, groups, PPP access, UPS monitoring APC, router safe-mode on power outage, LCD hardware option, 2 X 16 or 4 X 24 character backlit displays, configurable revolving system status / statistics
• FTP
  For uploading upgrade packages, uploading and downloading scripts, HotSpot authorization servlet pages.
• Upgrading
  Remote upgrading by uploading the software packages to the router

Scripting

Scripts can be scheduled for executing at certain times, periodically, or on events. All Terminal Console commands are supported in scripts.

Wireless Interfaces

(additional license purchase required)

• 2.4 GHz Wireless 802.11b clients
  Aironet 4800 ISA/PCI/PC
  Cisco 340/352 ISA/PCI/PC
  WaveLAN Bronze/Gold/Silver ISA/PC
  Prism II chipset based cards
  
• 2.4 GHz Wireless 802.11b Access Point
  Prism II chipset based cards
• 5.2 GHz Wireless 802.11a Access Points and clients
  Atheros chipset based cards
• 5.8 GHz Wireless
  10Mbps RadioLAN

Synchronous

(additional license purchase required)

• Protocols
  PPP Synchronous, HDLC, Cisco HDLC, Frame Relay
• Synchronous Interfaces
  Moxa C101 v.35 (4 Mb/s)
  Moxa C502 PCI 2-port v.35 (8 Mb/s)
  Cyclades PC-300 v.35
  Cyclades PC-300 E1/T1
  FarSync X.21
  

Asynchronous Interfaces

• Standard Communication Ports Com1 and Com2
• Moxa Smartio C104H/C168H PCI 4/8 port up to 4 cards (32 ports)
• Cyclades Cyclom-Y and Cyclades-Z Series up to 32 ports per card, up to 4 cards
• TCL DataBooster 4 or 8 PCI cards

Ethernet Interfaces

Most widely used single and multiport Ethernet interface cards including:

• ISA and PCI NE2000 compatible (most common network cards)
• 3Com 509 Series (3Com EtherLink III ISA)
• 3Com 3c59x/3c90x series
• Intel EtherExpress Pro 100
• Intel PRO/1000 series
• DEC 'Tulip' compatible
• Realtec RTL8139 based
• Winbond w89c840 based
• Davicom DM9102 based

ISDN Interfaces

• Most ISDN PCI Cards
  Data connections at 64...128kbps, client and server

VoIP Interfaces

• H.323 Protocol VoIP Analog Gateways
  QuickNet LineJack ISA
  QuickNet PhoneJack for IP telephones
  Voicetronix V4PCI - 4 analog telephone lines cards
  Zaptel X.100P IP telephony card (1 analog line)
• H.323 Protocol VoIP Digital Gateways
  ISDN cards for VoIP gateways
• H.323 Protocol IP Telephones
  QuickNet LineJack and PhoneJack ISA
  

xDSL Interfaces

(additional license purchase required - 'Synchronous')

• Xpeed 300 SDSL cards
  Up to 6.7km twisted pair wire connection, max 2.3Mbps

HomePNA Interfaces

• Linksys HomeLink PhoneLine Network Card
  Up to 10Mbps home network over telephone line.

Phone: +371 7 317 700 Fax: +371 7 317 701 URL: http://www.mikrotik.com E-mail: mt@mikrotik.com Call the office using our H.323 gateway: VoIP.MikroTik.COM Office hours: Monday-Friday 9AM-5PM local time (GMT + 2)